Aastra-DeTeWe presents the complete integration of
wireless DECT telephony in an IP infrastructure. The Radio Fixed Parts RFP 32 IP
and RFP 34 IP are connected directly to the LAN like a VoIP device and use the
benefits of established DECT technology for radio transmission. This ensures
full compatibility with cordless DECT terminals, which are available as system
telephones and standard GAP terminals.
The VoIP solution is particularly
suitable for branch offices that are connected to a company’s headquarters via
IP routes. The integrated mobile handsets act as normal company extensions,
which means that staff can always be reached on their telephone number,
regardless of whether they are currently in headquarters or one of the branch
offices. Using shared IP connections for data and telephony cuts down on the
need for extra infrastructure and therefore reduces costs.
The RFP 32 IP is the indoor version and the RFP
34 IP is the outdoor version.
Features
DECT
- All 120 DECT channels supported for
maximum use of DECT capacity
- 8 simultaneous voice channels per DECT IP
base station, 4 additional channels for handover
- GAP standard supported
- Connection handover in line with the GAP
standard
- DSAA authentication between base and
handset
- Cordless system telephones can use all
features offered by the OpenCom 100 or 1000
- Integrated DECT antenna in RFP 32 IP
- External dipole or directional antenna on
the RFP 34 IP
Service and Installation
- 3 LED‘s signalling the current operating
state: on RFP 32 IP outside, on RFP 34 IP inside
- Central configuration via WEB-Configurator
- Central system journal
- Central cluster administration
- Whirring alternatively from below (cable
duct) or from above (suspended ceiling) for RFP 32 IP
- RFP 34 IP can be connected via RJ 45 or
IDC (insulation displacement contact) connectors
VoIP
- VoIP connection using RTP/RTCP protocol
- G.711/G.723.1/G.729AB codec (additional
license required) depending on required voice quality and available
bandwidth
- Quality of service supported by Diffserv/ToS
Flag
- Adaptive jitter compensation
- Echo cancellation/suppression
- Voice activity detection and comfort noise
generator
Ethernet
- Connection via Ethernet 100 Base T
- Power supply in line with Power over LAN™
standard IEEE 802.3af, class 0
- IPv4
- Optional SNMPv1/v2c, MIB II, read only,
support of traps
Requirements
|